風電試驗平臺廠家直銷,鑄鐵風電試驗平臺廠家現貨的簡單介紹風電試驗平臺用來固定工件,和清理加工時產生的鐵屑.本設備主要用于風力發電機的安裝,試驗時進行裝夾連接;滿足動態試驗時對平臺的要求,保證試驗的可靠性和安全性.風電試驗平臺廠家直銷,鑄鐵風電試驗平臺廠家現貨的詳細信息風電試驗平臺廠家直銷,鑄鐵風電試驗平臺廠家現貨
風電試驗平臺 適用于風電公司加工工作平面使用,上面有孔和T型槽, 風電試驗平臺用來固定工件,和清理加工時產生的鐵屑.本設備主要用于風力發電機的安裝,試驗時進行裝夾連接;滿足動態試驗時對平臺的要求,保證試驗的可靠性和安全性. 風電試驗臺材質:高強度鑄鐵HT200-300工作面硬度為HB170-240,經過兩次人工處理(人工退火600度-700度和自然時效2-3年)使用該產品 的精度穩定,耐磨性能好. 風電試驗臺規格:100*100—3000*6000,(特殊規格根據需方圖紙制作.) Wind Power Testing Surface Plate Wind Power Testing Surface Plate is suitable for Wind power generation company as machining worktable. Material: The material of Cast Iron Testing Plate is high-strength cast iron HT200 and HT250. After two times’ artificial heat aging treatment( Artificial annealing temperature Specification: 100*100—3000*6000( Special specification is availiable as per customers’ drawing) 風電試驗平臺精度:按國家標準計量檢定規程執行,分別為0,1,2,3四個等級. 相關產品:風電試驗臺,風力發電試驗平臺,風電試驗平臺 風電試驗臺制成筋板式和 箱體式,工作面有長方形,正方形或圓形,材料HT200-300,QT400-600,ZG15-45.工作面采用刮研工藝,工作面上可加工V形,T形,U形槽,燕尾槽,圓孔,長孔等.平板是用于工件檢測或劃線的平面基準量具.風電試驗臺安裝就調至水平板,負荷均勻分布于各支點上.環境溫度(20±5)℃.使用時應避免振動. Wind Powder Surface Plate can be made into rib type or box type and the working surface are typically square, rectangular or round and are allowed to machined V, T or U-shaped grooves and round holes or other holes. It is always used as the datum for measurement of the machinery parts’ geometric tolerance,such as flatness, parallelism, straightness and more. It is also can be used for precision inspection, marking out (layout), and tooling setup. The environment temperature (20 + / - 以上是風電試驗平臺廠家直銷,鑄鐵風電試驗平臺廠家現貨的詳細信息,如果您對風電試驗平臺廠家直銷,鑄鐵風電試驗平臺廠家現貨的價格、廠家、型號、圖片有任何疑問,請聯系我們獲取風電試驗平臺廠家直銷,鑄鐵風電試驗平臺廠家現貨的最新信息 |